I found this list for wiper conversion parts I used on my bus.I
thought it might be helpful.

AM Equipment has a web page: www.amequipment.com
It shows everything you might need for a wiper conversion. Theydo not
have a kit for our Clippers & Visicoachs, so I figured outa parts list.
Here it is:
1 201-1040 motor,WJ65775,12volt, incl. hdwr.& 109.47
1 308-1010 LE62111-Drive arm/ w/ single link
2.63 1 304-1008 SH62711-Pivot shaft 1.26"HD DFS 32.21
1 201-1040 motor,WJ65775,12volt, incl. hdwr.& 109.47
1 308-1010 LE62111-Drive arm/ w/ single link 2.63
1 304-1008 SH62711-Pivot shaft 1.26"HD DFS 32.21
2 305-1002 KT48519-Panto adapt/BL, 3/4"shaft, 1.25 19.42
2 301-3240 Arm, 24" Pantograph Flatwire,WET 66.18
2 302-1120 Blade,12" Flex, 91 series 13.60
1 312-1005 Washer bottle ass./ 12volt/ 70oz. 41.12
1 311-1026 Switch, 12volt delay, 2 motor,coast park 85.28
1 313-1002 FI2T-Bulkhead fitting kit 5.36
1 314-1008 Hose, 3/16" ID, 18' long 6.31

I mounted the washer tank low on outside wall left of driversseat, out
of the way yet easy to see and fill, other locations had fit problems
or fill access problems. Wiper "park in center" seemsto be the least
annoying. The units need to be installed upside down to clear
defroster. Use existing main shaft holes and mount directly onthe
cover plate, panto shafts to the outside. Drilled extra hole ondrivers
side to get better mounting support. It worked perfect first time,
every time for me. Seal off your vacuum line and check the originalair
lines for leaks as you probably won't have access to that areaagain.
Happy wiping, JF
PS: Use the motor drive nearest but less than 90 degrees.

John Flammang
Flammang Construction
689 Holiday Dr.
Spring Creek, NV 89815
Voice: 775-738-6958
eMail: john@flamcon.com